How Much Does Whole-house Renovation Cost?
How much does whole house renovation cost? The honest answer depends on three things more than anything else: the size and age of the home, how much of the work touches plumbing, electrical, and structure, and the finish level you choose. Two houses on the same street in East Austin can land far apart in price because one keeps its floor plan and the other moves walls and relocates a kitchen. Anyone who quotes you a firm number before walking your home is guessing. By the end of this guide you will know what actually moves the price, how to read a quote, and how to get a real number for your house.
What Drives the Cost of Whole-house Renovation
Renovation pricing is not a mystery. It is a stack of decisions, and each one pushes the total in a known direction. Here are the six that matter most in the Austin metro.
Square footage and how much of it you touch
Size sets the baseline. A whole-house renovation on a 2,800-square-foot Westlake home involves more flooring, more paint, more trim, and more labor hours than the same scope on a 1,200-square-foot bungalow in Travis Heights. But the sharper question is how much of the house you actually renovate. Refreshing every room costs less per square foot than gutting every room. Walk your home and be honest about which spaces need cosmetic work and which need to come down to the studs. That split drives the estimate more than the total footage does.
The age and condition of the home
Older homes hide older systems. A 1940s Hyde Park house may carry outdated wiring, galvanized plumbing, or foundation movement that has to be addressed before any finish work starts. That is money spent behind the walls, and it raises the price without changing how the home looks. A newer home in Round Rock or Pflugerville usually needs less of this. You can tell which side you are on by pulling your inspection report, if you have one, or by asking your estimator to flag system-level work separately in the quote.
Layout changes and structural work
Keeping the existing floor plan is the cheapest path. The moment you remove a load-bearing wall, relocate a bathroom, or open a kitchen to the living room, you add engineering, framing, and permit costs, plus plumbing and electrical reroutes. Structural changes are often worth it for how the home lives and sells, but they are the single biggest lever on price after size. If your wish list includes the words "open up" or "move," expect the estimate to reflect it.
Kitchens and bathrooms in the scope
These two rooms concentrate cost. Cabinets, countertops, tile, fixtures, and the trades needed to install them make a kitchen or bathroom remodel the most expensive square footage in the house. A whole-house project that includes a full kitchen remodel and two bathroom remodels sits in a different bracket than one that repaints, refloors, and updates lighting throughout. Count your kitchens and baths, then decide which ones need a full remodel versus a refresh.
Finish level and material choices
Builder-grade laminate and quartz slabs with custom cabinetry are different projects wearing the same floor plan. Finish level is where you have the most control. This is also where local knowledge pays off. We price work with resale in mind, because we list homes as well as renovate them, and we know which finishes Austin buyers pay for and which ones they walk past. A Tarrytown buyer expects a different finish level than a first-time buyer in Hutto, and your budget should match the neighborhood, not a magazine.
Permits, access, and site conditions
Permitting inside Austin city limits works differently than in Georgetown, Kyle, or Leander, and permit complexity adds time and cost. So do site conditions: a home on a tight Zilker lot with no driveway access costs more to work on than one with room to stage materials. You can tell which side you are on by asking your estimator how they handle permitting in your specific city and whether access affects their labor pricing.
Cost Factor Table
| Factor | Pushes the price down when… | Pushes it up when… |
|---|---|---|
| Square footage touched | You renovate selectively and leave sound rooms alone | Every room gets gutted and rebuilt |
| Home age and condition | Systems are updated and the structure is sound | Wiring, plumbing, or foundation work must come first |
| Layout changes | The floor plan stays as it is | Walls move, rooms relocate, or structure changes |
| Kitchens and baths | These rooms get a refresh, not a full remodel | Multiple full kitchen and bathroom remodels are in scope |
| Finish level | Materials are durable, mid-range, and matched to the neighborhood | Custom cabinetry, premium slabs, and designer fixtures throughout |
| Permits and access | The site is easy to reach and permitting is simple | City permitting is complex or the lot restricts access |
How to Get an Accurate Whole-house Renovation Estimate
A real number starts with a walkthrough, not a phone call. Before the walkthrough, gather three things: a list of every room and what you want done in it, any inspection reports or known problems, and a finish level in mind, even if it is just photos you have saved. The clearer your scope, the tighter the estimate.
A good quote should itemize by room or by trade, separate labor from materials, name allowances for items you have not picked yet, and state what is excluded. If a quote is one number on one page, you cannot compare it to anything, and you cannot hold anyone to it.
Estimates differ between providers for real reasons, not just markup. One contractor may assume you keep the layout while another prices the wall removal you mentioned in passing. One includes permit fees, another leaves them out. Additionally, one prices builder-grade allowances, another prices what you actually described. When you compare quotes, compare scopes first. The cheapest number often describes the smallest project.
Our team runs this differently than a standalone contractor. Because we buy, sell, and renovate homes across the Austin metro with our own subcontractor team, the walkthrough covers both what the work costs and what it does for the home's value. If you are renovating to sell, that changes which line items belong in the scope at all.
Ways to Keep the Cost Down
You do not need coupons. You need scope discipline.
- Keep the floor plan. If the layout works, leave the walls alone. Cosmetic renovation of an intact floor plan is the highest-impact, lowest-cost version of this project.
- Refresh instead of remodel where it earns nothing. Painting cabinets and swapping hardware can carry a secondary bathroom. Save the full remodel budget for the kitchen and primary bath, where buyers and daily life reward it.
- Match finishes to the neighborhood. Over-improving past what your street supports spends money the home never returns. This is where a team that also lists homes gives you a straight answer.
- Get two or three itemized quotes. Not to grind on price, but to see where scopes disagree. The disagreements show you where your project is undefined, and undefined scope is where budgets blow up.
- Fix small problems before they become demolition. A slow roof leak or a running toilet becomes subfloor replacement and mold remediation. Handling punch-list repairs early keeps the renovation about upgrades, not damage.
Cost Questions People Ask
How much does it cost to remodel a 2,000 sq ft house in Texas?
There is no honest single number, because a 2,000-square-foot cosmetic refresh and a 2,000-square-foot gut renovation are different projects by a wide margin. The drivers above, especially layout changes, kitchen and bath count, and finish level, matter more than the square footage alone. Get an itemized estimate for your specific scope; a walkthrough answers this in a way a search result cannot.
How much does a whole-house renovation cost in Round Rock, TX?
Round Rock homes tend to be newer than central Austin housing stock, which often means less behind-the-walls surprise cost. The price still comes down to scope and finish level, and permitting in Round Rock differs from Austin proper. We serve Round Rock and the rest of Williamson County, so a walkthrough there works the same way: itemized scope, allowances named, exclusions stated.
How much does a whole-house renovation cost in Hutto, TX?
Hutto follows the same logic. Much of the housing stock is recent construction, so renovations there lean cosmetic: flooring, paint, kitchen updates, and outdoor living. That usually means a lighter scope than a 1950s central Austin remodel. The right finish level for Hutto resale is also different than for Tarrytown, and pricing to the neighborhood keeps the budget sane.
What is the 30% rule in remodeling?
It is a common rule of thumb that says you should avoid spending more than about a third of your home's value on a renovation, so you do not over-improve past what the neighborhood supports. Treat it as a sanity check, not a law. What your street actually supports matters more than any fixed ratio, and a local team that sells homes in your area can tell you where that line sits.
The Bottom Line
The cost of a whole-house renovation in the Austin metro comes down to how much of the home you touch, what lives behind the walls, and the finish level you choose. No page on the internet can price your house; an itemized estimate from a walkthrough can. Gather two or three quotes with matching scopes, or call Lujo Realty at 512.749.4147 and we will walk the home, price the work, and tell you plainly what is worth doing.
If you need pre-listing home renovation, Lujo Realty can help.
Prefer to talk it through? Call Lujo Realty — a quick call is usually the fastest way to get a straight answer for your situation.